How To Upload Pictures From P900 To Computer

To upload pictures to a calculator, connect the camera via a wireless network or using the supplied USB cable.

Connecting via USB
Wireless Networks (Wi-Fi)

Connecting via USB

If the supplied USB cable is used to connect the photographic camera to a computer running ViewNX-i, y'all tin can copy pictures to the computer, where they can be viewed, edited, and organized.

Installing ViewNX-i

Download the ViewNX-i installer from the post-obit website and follow the on-screen instructions to complete installation (existing users should be sure to download the latest version, as earlier versions may not support the camera). An Net connectedness is required. For arrangement requirements and other information, run into the Nikon website for your region.

https://downloadcenter.nikonimglib.com/

Utilise Nikon'due south Capture NX-D software to fine-tune photos or to change settings for NEF (RAW) pictures and save them in other formats. Capture NX-D is available for download from:

https://downloadcenter.nikonimglib.com/

Copying Pictures to the Computer

For detailed instructions, see the online assistance for ViewNX-i.

Connect the USB cable.

After turning the photographic camera off and ensuring that a memory card is inserted, connect the supplied USB cable as shown.

Connect the photographic camera directly to the computer; do non connect the cablevision via a USB hub or keyboard.

To ensure that data transfer is not interrupted, be sure the camera bombardment is fully charged.

Be sure the camera is off when connecting or disconnecting interface cables. Do not use force or attempt to insert the connectors at an angle.
Turn the photographic camera on.

The Nikon Transfer 2 component of ViewNX-i will outset (if a message is displayed prompting you to choose a programme, select Nikon Transfer ii). If Nikon Transfer 2 does not start automatically, launch ViewNX-i and click the "Import" icon.
If the following dialog is displayed, select Nikon Transfer 2 equally described below.
1. Nether Import pictures and videos, click Change program. A plan choice dialog will be displayed; select Nikon Transfer 2 and click OK.
2. Double-click .
Windows ten and Windows 8.1

Windows 10 and Windows 8.i may brandish an AutoPlay prompt when the camera is continued. Tap or click the dialog and and then tap or click Nikon Transfer 2 to select Nikon Transfer two.

If Nikon Transfer 2 does not start automatically, confirm that the camera is connected then launch Epitome Capture (an application that comes with macOS or OS X) and select Nikon Transfer 2 as the awarding that opens when the camera is detected.
Click Start Transfer.

Pictures on the retention card volition be copied to the computer.

Click Outset Transfer

Do non endeavour to transfer movies from the retention card while it is inserted in some other camera. Doing so could consequence in the movies being deleted without being transferred.

Practise non turn the camera off or disconnect the USB cable while transfer is in progress.
Turn the camera off.

Turn the camera off and disconnect the USB cable when transfer is consummate.

Wireless Networks (Wi-Fi)

The post-obit methods tin be used to connect to a computer via Wi-Fi. For more than information, see the Network Guide.

Congenital-in Wi-Fi

Utilize the Connect to PC option in the camera setup bill of fare to connect to computers either directly or via a wireless router.

Connection via a wireless router

Direct wireless connection

The WT-7 Wireless Transmitter

When the photographic camera is connected to an optional WT-7 wireless transmitter, the Wireless transmitter (WT-vii) option in the setup menu can exist used for connection to computers or ftp servers.

Use the WT-7 for connectedness to Ethernet networks and for more reliable connections to wireless networks. With Photographic camera Control Pro 2 (bachelor separately), the camera can exist controlled remotely and pictures saved directly to the computer as they are taken.